K500

Flow switch for pipes from DN25 to DN200

Description
The flow switch K500 is used to control the flow in the pipes of the heating
and/or conditioning system. The flow switch is fitted as standard with three
blades for use in pipes from DN25 to DN80, plus a fourth blade for pipes with
a diameter of (or greater than) DN100. The device is designed in such a way as
to ensure hermetic separation of the mechanical part from the electric part.
The electric head can be removed and replaced.

Operation
When inserted in the pipe, the blade movement is proportional to the flow
that strikes it; the movement is mechanically transmitted to a microswitch
that activates or deactivates an electric contact (figure 2). The sensitivity of
the flow switch can be adjusted via the setting screw (figure 1). A particular
feature of the device is its low load loss.

Main characteristics
• For use in pipes DN25÷200
• Body in nickel-plated brass
• Blades in steel
• Protection blower in NBR
• Spring in steel
• SPDT microswitch
• Contact capacity 250 V - 5 A
• Electric connection by means of DIN 43650A connector
• Protection degree IP65
• Weight 350 g

Technical data
• Max. fluid temperature: 110 °C
• Max. working pressure: 25 bar
• Average loss of pressure: 0,15 bar (at maximum capacity)
• Precision: ±15%