Platella Vertical Panel

Technical characteristics

• Working pressure 10 bar
• Test pressure 13 bar
•  Maximum operating temperature 110 °C
•  NF Certification in models 10, 20 and 21.

Included in the packing
4 x 1/2” connections (perpendicular to the ground), inside thread
1 central connector with 50 mm tappings centre (1/2” inside thread) – choice of bottom or top
3 x 1/2” blind caps provided, to be mounted
1 x 1/2” vent plug provided, to be mounted
Vertical radiators are available in two different configurations:with central connection at the bottom (configuration AB) or at the top (configuration AA) – see modified order code at the bottom of the tables
The 20, 21 and 22 models of vertical panel are finishedwith side covers; in the AB configuration (central connection at the bottom), they also have a top
grille; model 10 has no grille or side covers.

Brackets and supports
• 2 x GB brackets with top safety hook are provided (1 bracket for 300 mm-wide model)
• 3 pairs of welded back supports (3 single supports for 300mm-wide models)

Connection

• Vertical radiators can be connected to a two-pipe installation with top/bottom opposite side, bottom/bottom opposite side, top/top opposite side connections and in the configuration with central connection. The two-pipe connection requires a valve and lockshield (not provided). It can also be connected to a two-pipe installation with central connection and valve/lockshield group with 50 mm tappings centre (available as an accessory on request).
• Vertical radiators can be connected to a one-pipe installation using a one-pipe valve with external probe only.
• Floor anchors not available.

Safety

• Vertical radiators cannot be inverted around any of the three axes.
• The sides of Vertical radiators are fastened with screws, safer than the interlocking system adopted on other panel radiators.

Optional
Brakets and optional accessories are available on dedicated pages.